How to Install Flex Led Lights under Dash

To install flex LED lights under the dash, first, clean the area thoroughly. Then, peel off the adhesive backing and adhere the lights in the desired position.

Table of Contents

Gathering Necessary Tools And Materials

Before you begin the installation of flex LED lights under your dash, it is important to gather all the necessary tools and materials. Having everything ready before you start will ensure a smooth and hassle-free installation process. Below, we have provided a comprehensive list of the tools and materials you will need.

List of Required Tools

Screwdriver – to easily remove any screws or panels
Wire cutters – for cutting and trimming wires to the correct length
Wire strippers – to remove the insulation from the wires
Electrical tape – for securing and insulating the wires
Zip ties – to neatly organize and secure the wires
Drill – if required to create holes for mounting brackets
Socket wrench set – for disconnecting and reconnecting the battery

List of Required Materials

Flex LED light strip – choose a color and length that suits your preference
Mounting brackets – to securely attach the LED light strip under the dash
Adhesive tape or Velcro – for mounting the light strip and brackets in place
Electrical connectors – to join wires together
Electrical wire – of appropriate gauge for connecting the LED lights
In-line fuse – to protect the circuit from overloading
Fuse holder – to hold the in-line fuse in place
Battery clamps – if you need to connect the lights directly to the battery

Now that you have a clear understanding of the tools and materials required, make sure you gather everything before you start your installation. This will save you time and prevent any interruptions during the process. Once you have everything ready, you can move on to the next steps of the installation, which we will explain in detail in our upcoming blog posts.

Measuring And Preparation

Identifying the Installation Area

Before installing flex LED lights under the dash of your vehicle, it’s important to identify the ideal installation area. This area should have enough space to accommodate the lights and ensure they are well-placed for optimal visibility.

Start by examining the underside of your vehicle’s dashboard. Look for an area that is relatively flat and free from any obstructions such as wires or other components. It’s also important to consider the proximity to power sources and whether there is enough clearance for the light strips.

Additionally, take note of any areas where the lighting effect will be most visible and enhance the overall aesthetics of your vehicle’s interior. Due consideration should be given to the desired illumination pattern and how it will complement the dashboard design.

Measuring the Dash Area for LED Placement

Once you have identified the installation area, the next step is to measure the dash area to determine the exact placement of the flex LED lights. This measurement is crucial to ensure an even distribution of light and a professional finish.

Grab a measuring tape and carefully measure the length and width of the installation area. Measure around any curves or bends, as these will affect how the flex LED lights are positioned. Take note of these measurements to guide you during the installation process.

Consider the desired spacing between each LED strip. Keep in mind that closer spacing will result in a more concentrated and intense illumination, while wider spacing will create a softer and more diffused light effect. Ensure that the spacing is even and symmetrical throughout the installation area.

If necessary, you can create a simple diagram or sketch of the installation area. This will help you visualize the placement of the flex LED lights and ensure a clean and precise installation.

Remember, proper measurement and preparation are key to achieving a professional-looking installation of flex LED lights under the dash. So take your time and make sure to accurately measure and plan before proceeding to the actual installation process.

Preparing The Dash

Before installing flex LED lights under the dash of your car, it is important to properly prepare the dash surface. This ensures a clean and obstruction-free installation, resulting in a sleek and professional finish.

Cleaning the Dash Surface

To start, thoroughly clean the dash surface using a mild soap and water solution. Remove any dust, dirt, or grime that may be present. This not only helps the LED lights adhere better to the surface but also ensures a smooth and even glow.

Tip: Use a lint-free cloth or microfiber towel to avoid leaving any fibers or lint behind. This will guarantee a pristine finish.

Removing any Obstructions

Next, remove any obstructions that may hinder the installation process. This could include objects such as accessories, wiring, or clutter that may obstruct the placement of the LED lights.

Tip: Create a clear and clutter-free workspace by removing any unnecessary items from the dash area. This will provide ample space for the installation process and prevent any potential damage to the LED lights.

Once you have cleaned the dash surface and removed any obstructions, you are ready to proceed with the installation of the flex LED lights under the dash. Following these preparation steps will ensure a smooth and hassle-free installation and guarantee a stunning lighting effect in your car.

Applying The Adhesive Tape

When installing flex LED lights under the dash of your vehicle, applying the adhesive tape correctly is essential for a secure and long-lasting installation. The adhesive tape helps to adhere the LED strip firmly, ensuring it stays in place and doesn’t come loose over time. In this section, we will discuss two important steps: cutting the adhesive tape to size and applying it to the LED strip. Follow these steps to ensure a successful installation.

Cutting the adhesive tape to size

Measuring the Dash Area for LED Placement

Before applying the adhesive tape to the LED strip, it’s important to cut it into the right lengths. This step allows you to customize the tape to fit the specific areas where you plan to install the lights. Here’s how to cut the adhesive tape to size:

Measure the length of the area where you want to install the LED strip. Use a measuring tape to get an accurate measurement.
Mark the measurement on the adhesive tape using a pen or marker. Ensure that the tape is cut precisely to avoid any gaps or overlapping.
Using sharp scissors or a utility knife, carefully cut along the marked line. Make sure to apply even pressure to ensure a clean, straight cut.
Repeat this process for each section of the LED strip that requires adhesive tape.

Applying the adhesive tape to the LED strip

Once you have cut the adhesive tape to the appropriate lengths, it’s time to apply it to the LED strip. This step ensures that the strip adheres to the desired surface securely. Follow these steps to apply the adhesive tape:

Peel off the backing paper from the adhesive tape, exposing the sticky side.
Align the sticky side of the tape with the back of the LED strip. Make sure the tape is centered and covers the entire length of the strip.
Press the tape firmly onto the strip, ensuring good contact between the adhesive and the strip’s surface. Use your fingers or a small roller to apply even pressure along the entire length of the tape.
Repeat this process for each section of the LED strip that requires adhesive tape.

By properly cutting and applying the adhesive tape, you can ensure a strong bond between the LED strip and the surface, preventing any potential loosening or detachment. Take your time during this step to ensure a clean and professional installation.

Securing The Led Strip

Positioning the LED strip on the dash

Before securing the LED strip under your dash, it is crucial to position it correctly. Begin by planning where exactly you want to install the strip. Take into consideration the shape and curves of your dashboard, as well as any obstacles that may hinder the strip’s visibility or functionality. You may find it helpful to divide your dash into sections and mark the desired positioning with a marker or tape.

Pressing the strip firmly to ensure adhesion

Once you’ve determined the ideal placement for your LED strip, it’s time to secure it to the dash. To ensure strong adhesion, it is essential to press the strip firmly onto the surface. This can be done by using your fingertips or a flat tool such as a credit card or plastic spatula. Apply even pressure along the entire length of the strip, making sure it adheres properly. Pay close attention to corners and edges, as these areas tend to have less surface contact. Remember, the better the adhesion, the longer-lasting the installation will be.

Table: Tips for securing LED strip under dash

Tips
Clean the dash surface thoroughly before installation to remove any dirt or dust particles that may hinder adhesion.
If your LED strip has an adhesive backing, remove the protective film before pressing it onto the dash.
Ensure the dash surface is dry to avoid any moisture affecting the adhesion.
If your LED strip doesn’t have an adhesive backing, use adhesive tape or glue specially designed for automotive applications.
Consider using additional adhesive clips or brackets for added security, especially if you anticipate frequent vibrations or movement of your vehicle.
Test the strip’s functionality before securing it permanently to ensure it lights up as desired.
If necessary, use heat-resistant adhesive for areas of the dash that may be exposed to higher temperatures.

By positioning the LED strip properly and pressing it firmly to ensure adhesion, you can create a sleek and professional-looking installation of flex LED lights under your dash. Follow these steps and tips for a successful installation that will add a vibrant and customizable touch to your vehicle’s interior.

Connecting The Power Supply

Installing flex LED lights under the dash of your vehicle can add a touch of style and personalization to your interior. However, before you can enjoy the mesmerizing glow of these lights, you need to connect them to a power source. In this section, we will guide you through the process of identifying the power source and making the necessary electrical connections with ease.

Identifying the power source

The first step in connecting your flex LED lights is to identify a suitable power source. This source should be able to provide a stable and constant supply of power to ensure your lights function properly. There are a few options to consider:

The fuse box: This is a common choice as it offers direct access to the vehicle’s electrical system. Look for a fuse that is not critical to the operation of the vehicle, as you don’t want to risk any malfunctions.
The cigarette lighter socket: If you prefer a less invasive option, using the cigarette lighter socket can be a convenient solution. Just make sure it can handle the power requirements of your LED lights.
The battery: Connecting directly to the battery may be necessary for high-powered LED lights or if you want to have complete control over the power supply. However, be cautious and ensure proper fusing and wiring to avoid any potential hazards.

Making the necessary electrical connections

Once you have identified your power source, it’s time to make the electrical connections. Follow these steps to ensure a secure and reliable connection:

Gather your tools: You will need a wire stripper, electrical tape, crimp connectors, and a pair of pliers.
Prepare the power and ground wires: Strip the insulation from the ends of both the power and ground wires. This will expose the bare copper wire for a clean connection.
Connect the power wire: Attach the power wire from the LED lights to the positive terminal of your power source. Use a crimp connector to secure the connection and prevent any loose wires.
Connect the ground wire: Take the ground wire from the LED lights and connect it to a suitable grounding point near your power source. This could be a bolt or screw that is securely attached to the vehicle’s chassis.
Safeguard the connections: Once the connections are made, use electrical tape to wrap around the crimp connectors to protect them from moisture and ensure a stable connection.
Test the lights: Before finalizing the installation, test the lights to ensure they are working properly. If everything is functioning as expected, you can proceed with securing the wiring and mounting the LED lights under the dash.

Remember, the specific steps and procedures may vary depending on your vehicle and the type of LED lights you are installing. It’s always a good idea to consult the manufacturer’s instructions and seek professional assistance if needed. With a little patience and the right tools, you’ll soon have your dash illuminated with stunning flex LED lights.

Wiring The Led Lights

One of the most important steps in installing Flex LED lights under the dash is properly wiring them. This ensures that the lights function correctly and can be controlled easily. In this section, we will guide you through the process of running the wires to the power source and securing them neatly.

Running the wires to the power source

Before you begin running the wires, make sure you have chosen a suitable power source. Usually, the best option is to connect the LED lights to the vehicle’s battery, as this provides a stable and reliable power supply. Here are the steps to run the wires:

Identify the route: Plan the route for the wires that connect the LED lights to the power source. Make sure to choose a route that avoids any potential hazards or moving parts in the vehicle.
Prepare the wires: Cut the wires to the appropriate length, leaving some extra length for flexibility. It’s a good practice to use wires of different colors to easily identify their purpose.
Find access points: Look for existing access points in the vehicle’s dashboard or under the carpet. This will help you hide the wires and maintain a clean installation.
Route the wires: Carefully route the wires along the chosen path, ensuring they are away from any moving parts or sharp edges that could cause damage. Use zip ties or adhesive clips to secure the wires in place.
Connect to the power source: Once the wires are routed, connect them to the power source. Strip the ends of the wires and connect them to the appropriate terminals, ensuring a tight and secure connection.

Securing the wires neatly

Properly securing the wires not only ensures a neat and professional-looking installation but also protects them from damage. Here are some tips to help you secure the wires:

Use zip ties: Bundle the wires together using zip ties at regular intervals. This will keep them organized and prevent them from tangling.
Hide the wires: Whenever possible, hide the wires behind panels, under trim pieces, or along existing wire harnesses. This will make the installation appear seamless and tidy.
Use adhesive clips: Attach adhesive clips along the routed wires to keep them in place and prevent them from sagging or hanging loose.
Tuck the wires: Take any excess wire length and tuck it out of sight. This can be done by coiling the extra wire and securing it with a zip tie or tucking it behind panels.
Test the lights: Before finalizing the wire securing process, test the LED lights to ensure they are functioning correctly. This allows you to address any wiring issues before completing the installation.

By following these steps and guidelines, you can successfully wire the Flex LED lights under your vehicle’s dash. Remember to take your time, be careful with the wiring, and always prioritize safety. Once complete, you will have a dazzling and customized lighting setup that enhances the ambiance of your vehicle.

Testing The Lights

Testing the lights Now that you have successfully installed the flex LED lights under your dash, it’s time to test them out and make sure they are functioning properly. Testing the lights is an essential step to ensure that everything is in working order before you finalize the installation. In this section, we will guide you through the process of checking the functionality of the LEDs and making any necessary adjustments.

Checking the functionality of the LEDs

The first step in testing the flex LED lights is to turn on your vehicle’s power. Make sure that the ignition is on and the lights are off. Once you have done this, flip the switch to activate the LED lights. Take a moment to observe the lights and make sure they come on. It’s important to pay attention to the color and intensity of the lights. The LED lights should emit a vibrant and consistent color, with no flickering or dimness. If you notice any issues with the color or intensity, you may need to check the wiring connections or adjust the positioning of the lights. Next, test the different lighting modes or patterns if your flex LED lights have them. Depending on the type of lights you have installed, you may have the option to switch between various modes such as steady glow, strobe, fading, or color-changing. Ensure each mode is working as intended by switching between them and confirming that the lights respond accordingly.

Making any necessary adjustments

If you encounter any problems during the testing process, don’t panic. It’s common to experience minor issues that can be easily resolved with a few adjustments. First, check the wiring connections to make sure they are securely in place. Loose connections can result in faulty or intermittent lighting, so ensure that all wires are tightly attached and insulated properly. If you find any loose connections, tighten them using a screwdriver or pliers. Additionally, if you notice that the lights are not evenly distributed or aligned, you may need to make some adjustments. Flex LED lights are flexible, allowing you to bend and position them to your liking. Carefully reposition the lights, ensuring that they are evenly spaced and aligned under the dash. You can use adhesive clips or cable ties to secure the lights in place if necessary. Remember to test the lights again after making any adjustments to ensure that the issues have been resolved. Repeat the steps mentioned earlier to verify that the LEDs are functioning correctly. By thoroughly testing and making any necessary adjustments, you can have peace of mind knowing that your flex LED lights are installed properly and working as intended. Now that you have successfully tested the lights, you can enjoy the vibrant and customizable ambiance they create in your vehicle’s interior.

Securing The Wiring

Using zip ties for cable management

Once all the wiring is in place, it’s important to secure and organize it properly to ensure a clean and professional-looking installation. One of the easiest ways to achieve this is by using zip ties for cable management.

Start by gathering all the wires together and arranging them neatly. Use zip ties to hold the wires together, creating bundles and minimizing clutter. Be sure to leave enough slack in the wires so that they can move freely with the movement of the vehicle.

When placing the zip ties, make sure to tighten them just enough to hold the wires together, but not so tight that they damage the insulation or restrict the movement of the wires. It’s also a good idea to leave a little extra length on the zip ties in case any adjustments need to be made later on.

Tucking the wires out of sight

After securing the wires with zip ties, the next step is to tuck them out of sight. This not only makes for a cleaner and more aesthetically pleasing installation, but also helps to prevent any potential hazards or interference with the vehicle’s controls.

Start by identifying any existing wire channels or openings in the vehicle’s dash. These can provide a convenient route for routing the wires. If there are no predefined paths, create your own by carefully drilling small holes or using adhesive clips designed for wire management.

Once you have a route for the wires, carefully guide them through the channels or openings, ensuring that they are not impeding any moving parts or obstructing any vents or controls. Use adhesive-backed cable clips or tape to secure the wires along their path and prevent them from moving or vibrating while driving.

Finally, double-check that all the wires are neatly tucked away and hidden from view. This will give your installation a professional and seamless appearance.

By using zip ties for cable management and tucking the wires out of sight, you can ensure a secure and visually appealing installation of flex LED lights under your dash. These steps will not only prevent any potential damage to the wires but also enhance the overall aesthetics of the interior of your vehicle.

Concealing The Power Supply

Pressing the strip firmly to ensure adhesion

Hiding the power supply in a secure location

When it comes to installing flex LED lights under your car’s dash, one crucial step is concealing the power supply. This not only ensures a neat and professional-looking installation but also keeps the power supply safe from any accidental damage. To achieve this, you need to find a secure location where the power supply can be hidden away.

Here are a few ways you can effectively hide the power supply:

Locate a hidden spot: Look for an area within your car’s cabin that is out of sight and easily accessible. This could be behind the dashboard, inside the glove compartment, or under the seats. Keep in mind that the power supply should be placed away from any areas where it may get wet or too hot.
Use adhesive Velcro: Attach adhesive Velcro strips to the back of the power supply and stick it to a suitable surface. This allows for easy removal and repositioning if needed, making it convenient for future maintenance.
Secure with zip ties: If you prefer a more permanent solution, use zip ties to secure the power supply to a sturdy structure inside your car. This method ensures maximum stability and reduces the risk of the power supply being accidentally jostled or dislodged.

Remember, the key is to find a secure location that is both easily accessible for future maintenance and hidden from plain view. This way, you can enjoy the benefits of the LED lights without any unsightly wires or clutter.

Ensuring easy access for future maintenance

While it’s important to conceal the power supply, it’s equally vital to ensure easy access for future maintenance. This will save you time and effort in case you need to make any adjustments or repairs.

Here are a couple of tips to ensure easy access:

Leave enough slack in the wiring: When routing the wires from the power supply to the LED lights, make sure to leave enough slack. This will allow for easy removal and reinstallation of the power supply when necessary.
Create a labeling system: Use labels or colored markers to identify each wire connection. This helps in quickly identifying and disconnecting the power supply during maintenance without needing to trace individual wires.
Document the installation process: Take pictures or create a diagram of the installation process, highlighting the locations of the power supply and wire connections. This documentation will serve as a handy reference in the future, especially if you need to remove and reinstall the power supply.

By following these tips, you can ensure easy access for future maintenance, making any necessary adjustments or repairs a breeze.

Final Inspection And Cleanup

Final Inspection and Cleanup

Once you have installed the flex LED lights under your dash, it’s time to perform a final inspection and cleanup. This step is crucial to ensure that everything is in order and ready for use. In this section, we will cover two essential tasks: checking for any loose connections and cleaning up any installation debris.

Checking for any loose connections

Before wrapping up the installation process, it’s important to check for any loose connections. This will help prevent any potential issues that may arise later on. Here’s a step-by-step guide on how to inspect the connections:

Start by visually inspecting each connection point. Look out for any wires that are not securely fastened or any signs of damage.
Gently wiggle each connection to ensure that they are tightly secured. Pay close attention to the connection points where the wires meet the LED strips.
If you notice any loose connections, carefully tighten them using a screwdriver or the appropriate tool. It’s important not to overtighten to avoid damaging the connections.

By thoroughly examining and securing the connections, you can avoid any potential electrical issues and ensure that your flex LED lights function properly.

Cleaning up any installation debris

During the installation process, it’s common for debris, such as dust or small particles, to accumulate. Cleaning up this debris is not only important for aesthetic reasons but also for the longevity of your flex LED lights. Here’s how you can effectively clean up the installation area:

Start by using a clean, dry cloth or compressed air to remove any loose debris from the dashboard and surrounding areas.
Next, use a mild cleaning solution or glass cleaner to wipe down the dashboard. This will help remove any stubborn dirt or residue.
Ensure that the cleaning solution is applied lightly and doesn’t come into direct contact with the flex LED lights or their connections.
Once you have cleaned the dashboard, use a lint-free cloth to dry it thoroughly. Avoid leaving any moisture behind, as it can lead to potential issues.

By properly cleaning the installation area, you can maintain the aesthetics of your vehicle’s interior and ensure that the flex LED lights are free from any potential hazards caused by debris buildup.

Customizing The Lighting Effects

Adding a remote control for adjusting colors

If you want to take your flex LED lights under dash customization to the next level, adding a remote control will allow you to adjust the colors with ease. By incorporating a remote control system, you can instantly change the lighting to match your mood or the theme of your car interior. This simple addition gives you the power to create an immersive and personalized lighting experience.

To add a remote control to your flex LED lights, follow these steps:

First, ensure that your LED lights come with a compatible remote control system. Check the product specifications or contact the manufacturer for further information.
Locate the control module of your LED lights. This module is responsible for receiving signals from the remote control.
Connect the control module to the LED lights according to the manufacturer’s instructions. Typically, this involves plugging connectors or wires into designated ports.
Place the control module in a convenient and accessible location, such as under the dashboard or within easy reach for the driver.
Now, you can sync the remote control with the control module. This process may involve pressing certain buttons or following specific instructions provided by the manufacturer.
Once the remote control is successfully synced, you can start customizing the lighting effects! Experiment with different colors or create stunning color combinations that complement your car’s interior.

With a remote control, you have the freedom to adjust the brightness, speed, and color of your flex LED lights on the fly, giving you endless possibilities for customization.

Exploring different lighting patterns

Customizing your flex LED lights under dash goes beyond adjusting colors. Exploring different lighting patterns can truly elevate the ambiance of your car interior. By incorporating various patterns, you can create dynamic and eye-catching effects that will surely turn heads. Here are some popular lighting patterns to consider:

Pattern	Description
Strobe	The strobe pattern produces rapid flashes of light, creating a pulsating effect. This pattern is perfect for adding excitement and energy to your car’s interior.
Fade	The fade pattern smoothly transitions between different colors, creating a soothing and mesmerizing effect. This pattern is ideal if you prefer a more relaxed and calming ambiance.
Color cycling	The color cycling pattern constantly shifts through a spectrum of colors, creating a dynamic and ever-changing display. This pattern is great if you want to add a touch of vibrancy and movement to your car’s interior.
Music sync	The music sync pattern synchronizes the lighting effects with the rhythm and beats of the music playing in your car. This pattern creates a captivating visual display that enhances the music listening experience.

Experiment with these lighting patterns and find the ones that resonate with your style and preferences. By customizing your flex LED lights with different patterns, you can transform your car interior into a personalized oasis.

Showcasing Your Installation

Showcasing your installation

After putting in the time and effort to install flex LED lights under your dash, it’s time to show off your creativity and impress others with your unique dash lighting. There are several ways you can showcase your installation, from sharing photos and videos on social media to inspiring others with your creative dash lighting. In this section, we’ll explore how you can document and share your installation journey, and how doing so can inspire and engage others.

Sharing photos and videos on social media

One of the most effective ways to showcase your flex LED lights installation is by sharing photos and videos on social media platforms like Instagram, Facebook, or YouTube. A well-captured photo or a captivating video can instantly grab attention and inspire others to try out their own dash lighting project.

When sharing photos, make sure to capture your dash lighting from different angles and in different lighting conditions to showcase its full effect. Use relevant hashtags, such as #dashlighting or #flexLED, to reach a wider audience interested in similar projects. Engage with the community by responding to comments and providing helpful tips or answering any questions that may arise.

For videos, consider creating a tutorial or a time-lapse of your installation process. This can serve as a valuable resource for others looking to undertake a similar project. Provide clear instructions and helpful tips throughout the video, making it easy for others to follow along and replicate your installation.

Inspiring others with your creative dash lighting

Aside from sharing your installation process, you can also inspire others with your creative dash lighting ideas. Flex LED lights offer endless possibilities for customization, so get creative and experiment with different color combinations and lighting patterns. Showcasing your unique dash lighting can spark inspiration in others, encouraging them to think outside the box and personalize their own vehicles.

Consider sharing your creative dash lighting ideas along with the photos or videos of your installation. Explain the thought process behind your choices and the effects you aimed to achieve. This will not only inspire others but also help them understand the potential of flex LED lights and how they can transform the look of their own dashboards.

Remember, your creativity can influence others to try something new and exciting, so don’t hesitate to share your creations and encourage others to do the same.

Frequently Asked Questions For How To Install Flex Led Lights Under Dash

How Do You Connect Flexible Led Lights?

To connect flexible LED lights, simply attach the positive and negative ends of the lights to a power source, using connectors or soldering. Ensure proper polarity and insulate the connections.

How Do You Install Flexible Led Strip Lights?

To install flexible LED strip lights, follow these steps: 1. Clean the surface where the lights will be applied. 2. Measure the length needed and cut the strip accordingly. 3. Peel off the backing and stick the strip in place. 4.

Connect the power supply to the strip. 5. Test the lights to ensure they’re working correctly.

How Do You Stick Led Lights Under A Car?

To stick LED lights under a car, follow these steps: 1. Thoroughly clean the desired area. 2. Use adhesive mounting brackets or double-sided tape to attach the lights securely. 3. Connect the lights to the car’s power source, ensuring proper wiring.

4. Test the lights to ensure they’re functioning correctly. 5. For extra security, use zip ties to fasten any loose wires.

How Do You Install Led Under Cabinet Tape Lighting?

To install LED under cabinet tape lighting, follow these steps: 1. Measure and plan where you want to place the lights. 2. Clean the surface where the tape will be applied. 3. Peel off the adhesive backing and firmly press the tape into place.

4. Connect the tape to a power source using connectors or a transformer. 5. Test the lights to ensure they’re working properly.

Conclusion

Installing flex LED lights under the dash is a fun and creative way to enhance your car’s interior. With this simple guide, you have learned the step-by-step process of installation, from gathering the necessary tools to properly wiring the lights.

By following these instructions, you can easily add a touch of vibrant color and personal style to your vehicle. So why wait? Start your installation journey and enjoy the stunning ambiance that the flex LED lights will bring to your car today!